December 31, 2013

Oh San Juan ' ness - How Good You Are

Wrapped up 2013 with good friends and several crystal clear days among the always spectacular San Juan mountains.  We experienced rather stable conditions for the San Juan's allowing for us to safely enjoy the alpine. It had been quite a while since the last major loading event and the snowpack was largely settled and generally nonreactive. While the snow structure remains poor in most areas with our lovely CO persistent slabs. Slides appeared to of become more and more difficult to trigger.  All but southerly aspects below treeline seemed to mainly be made up of very weak faceted snow.  Which will likely cause a problem during the next major snow event. But for now the SJ's were Good to Us.



Here a view of the Sultan group which we we enjoyed on day 1 of the trip, riding three of the summits seen in the pic.


We started the amazing alpine tour at Molas pass with an ascent of the Grand Turk followed by a descent of a northern couloir to the basin in between the Grand Turk and Sultan Mountain. Next we climbed the SE face and ridge of the Sultan, then dropping into the basin via the Northstar Couloir. Followed by a final ascent north to pt. 12300', and a final run down the "Python" and back to HW 550.




Kendall Mountain seen from Mineral Creek after our decent of a northern couloir we called "The Bear Claw" off Bear Mountain 



An old ore Bucket Tram from Mayflower Mine upto Arrasta Gulch with the Sultan group lurking high in the background



Nia and Todd crossing the NW slopes of King Solomon Peak.  We spent a lot of the climb gawking at the impressive Turkey Chute seen just left of Nia.  Coming back for this one in the spring for sure!  Sultan's summit is also seen on right edge of photo 



Our first decent off the Grand Turk seen from the SE ridge of the Sultan  (The widening chute in the middle of the ridge line in the background)



John on the SE ridge of the Sultan with Silverton barely visible down below



Unloading our gear from the sled after Jack and his boy graciously gave us a bump up Arrasta Gulch on their way to their beautiful alpine cabin.  Saved about an hour climb and 500 vertical feet:)    



Nia with the days final climb up pt. 12300'.  Seen in the background is our descent down Sultan's Northstar Couloir ( directly above Nia's head)



Todd making his way down the east ridge of Bear Mountain towards the "Bear Claw" chutes, with the Sultan and the Python in the background



Todd with first tracks down the "Bear Claw" with Red Mountain Pass in the background



My Venture happy to be back in its birthplace.



John catching some air halfway down the Sultan's Northstar Couloir



Turkey Chute in all its glory



Island Lake Basin seen in background just left of center.  Kristin and I got engaged here in the summer of 2012 after riding our mountain bikes to the lower basin.



Todd topping out the steep climb up Grand Turk's SW col

December 23, 2013

OZ Snowboards - A Behind the Scenes Look

A few days ago Adam, mastermind and owner of OZ Snowboards shared a behind the scenes look to what I personally am calling one of the industries truly unique snowboard companies. The build quality and structural components of OZ boards are one of kind.  A few build points to highlight are:

1)  A solid non-jointed wood core:  Most snowboard manufacturers utilize finger jointed wood cores to cut costs, these finger joints act as weak spots in the boards core.  The amount of finger joints in a single board often vary from board to board.  OZ uses a solid wood core with no finger joints.  Another place manufactures cut costs is in the boards tip and tail.  Plastic is often used at the boards tip and tail rather then the wood core extending through the boards tip and tail.

2) Aerospace grade carbon fiber:  Most snowboard manufacturers use some form of fiberglass above and below the boards wood core.   All OZ Snowboards are made with tri-axial aerospace grade carbon fiber. This is the material used to build jets.  Carbon fiber is 5 times as strong and 1/3rd the weight of fiberglass and provides improved stability and control in a snowboard.

For more detailed info about the unique makeup of OZ boards visit the "Why Buy an OZ?"section of OZ Snowboards website.  

Lets just say my next board will be an OZ.  I've never been so impressed with the build quality of a snowboard.  And the weight, so light thanks to the carbon fiber.


Exposure1/125, Aperturef/2.8, Focal Length12 mm, ISO Speed250

Notice the finger joint on the left edge of the wood core.  This wood core is about to become one of thirty TommyKnocker Brewery Demo boards OZ made this year for some of the breweries events.  The demo boards that Oz makes are typically made using finger jointed wood cores and the tri-axial fiberglass vs the more expensive carbon fiber and solid non-jointed wood cores  


Exposure1/167, Aperturef/1.8, Focal Length45 mm, ISO Speed1000

CNC router milling out a future splitboard


Exposure:1/59, Aperturef/2.8, Focal Length32 mm, ISO Speed640

Bandsaw awaiting its replacement blade prior to trimming the freshly pressed TommyKnocker demo board seen in the background


Exposure:1/77, Aperturef/2.8, Focal Length16 mm, ISO Speed1000

Highly modified snowboard press - responsible for the unique camber / rocker profiles of OZ snowboards


Exposure1/167, Aperturef/2, Focal Length45 mm, ISO Speed500

Rob cleaning up the edges on a freshly made TommyKnocker demo board


Exposure:1/100, Aperturef/1.8, Focal Length45 mm, ISO Speed250

Adam placing the sidewall on a TommyKnocker demo board


Exposure:1/167, Aperturef/1.8, Focal Length45 mm, ISO Speed1000

Adam aligning a raw wood core on the CNC router 


Exposure:1/59, Aperturef/8, Focal Length29 mm, ISO Speed1600

Rob preparing to spread epoxy on the base of a TommyKnocker demo board seen in the background 


Exposure:1/167, Aperturef/2.8, Focal Length25 mm, ISO Speed1600

Alex tuning a freshly CNC milled sidewall


Exposure:1/77, Aperturef/2.8, Focal Length35 mm, ISO Speed1250

Rob cutting excess material from a freshly pressed TommyKnocker demo board


Exposure:1/100, Aperturef/1.8, Focal Length45 mm, ISO Speed400

Rob oxidizing a sidewall prior to attachment 


Stay tuned for more production photos as well as finished product photos 





December 17, 2013

The Mistress - Pasquini Livietta

Meet the mistress aka "Lev's".  She was introduced to the wife as a gift a while back.  I must confess, I often sneak out of bed early in the morning, while trying not to disturb the wife, in attempt to have some alone time with ol Lev's.  I've been accused many times, for perhaps bringing Lev's into our home for my benefit :)

Exposure1/59, Aperture: f/2.8, ISO Speed: 1250



















December 16, 2013

City of Golden - Highlights "A Chilled Coors" on Webpage

Check out the City of Golden homepage below you may recognize a Legal Addictions photo :)

http://www.cityofgolden.net/


Also here is a quick link to the original photos



December 15, 2013

Fun with Drugs

Exposure1/100, Aperture: f/2.8, ISO Speed: 800




This was taken through the glass of the sterile prep hood, giving a cool reflective feel.  Here a cisatracurium drip is being made to provide skeletal muscle relaxation during mechanical ventilation


Exposure8 sec, Aperture: f/2.8, ISO Speed: 250






This was taken in a pitch dark room, using a very long exposure and a handheld flash remotely triggered upon throwing the bio-hazard bottle across the room.  Same technique used to freeze fast moving objects, like a bullet from a gun.

December 7, 2013

Wide Open Baby Bump Bibs - 3rd Trimester Begins

Last off week we again chased to the POW with some friends ending up in Steamboat Springs, CO. Below a picture of my beautiful wife and growing Baby Mac suiting up in their wide open bibs for a day in the pow. Kristin just started her 3rd Trimester, and is still doing quite well.  Baby Mac is a kicker and a very active little sucker, according to the frequent ultrasounds that K and her colleagues capture during the slower times at work.  Seems we are gonna have our hands full in a few months:)    






December 4, 2013

Arctic Temps for the Front Range - A Chilled Coors

The first week of December was....record breaking and bone chilling to say the least.  With the mercury plummeting well below zero, Denver set a record low for the 4th.   Not long before midnight, the temperature had dropped to -13 degrees. This frigid reading shattered the record low temperature for December 4th. The previous mark was -5 degrees last set in 2008.
I got the bright idea to hike up the southern slopes of North Table Mountain behind our house and take several long exposure shots of Coors Factory, in order to capture the town lights of Golden along with the busy beer production going on within the factory.  The longer exposure times allowed for the capture of the moving steam coming from the factory on this bone chilling night.    
Exposure: 13 sec Aperture: f/10 ISO Speed: 250